코팅을위한 실리콘 디포 아머 SD - 3010A

짧은 설명 :

WynCoat®, Silicone deformer , due to their lower surface tension, silicone defoaming agents have greater defoaming action than organic defoaming agents. Organosilicon compounds (silicone oil) interfere with the surface tension of the gas-liquid interface, resulting in defoaming effect. SD-3010A is equivalent to 6800 in international markets.

우리에게 이메일을 보내십시오

제품 세부 사항

제품 태그

제품 세부 사항

WynCoat® SD-3010A is suitable for high solids, high build epoxy floor coatings and screen-printing ink suppression foams. Its main function is to form a thin film on the surface of the liquid, which can effectively prevent and destroy the formation of air bubbles, thereby avoiding excessive air bubbles inside the liquid and reducing the generation of foam.

주요 기능과 이점

● 고체 및 비 용매 에폭시 코팅의 제조 및 구조로 인한 발포를 방지하는 데 좋은 효과가 있습니다.

● 높은 점도 및 두꺼운 필름, 특히 비 - 용매 및 고 두꺼운 필름 에폭시 바닥재 코팅에서 우수한 안티 - 거품 특성.

전형적인 물리적 특성

외관 : 반투명 액체

활성 콘텐츠 : 100%

응용 프로그램 방법

● Incorporate before grinding and stirring to achieve optimum efficiency. Then, post-addition is recommended incorporate SD-3010A with sufficient mixing.

● In order to get better distribution and effects, we suggest to triturate colored paint and grinding parts together.

● Due to SD-3010A’s high active content, it can be pre-diluted to 10% solution with aromatic solvent. Because the hydrophobic particles is easy to precipitate, diluted product should spent immediately.

● SD-3010 shows thixotropic properties. Viscosity may be increase in low temperature or storage, but it is normality. We suggest to stir well before use.

● 최적의 복용량 수준은 필요한 효과에 따라 다르며 실험실 테스트를 통해 결정해야합니다.